Portable battery hydraulic cutting units radio controlled (32 pages)
Summary of Contents for Cembre HTEPE.DET12
Page 1
HYDRAULIC TOOL HTEPE.DET12 HTEPE.DET16 ENGLISH OPERATION AND MAINTENANCE MANUAL...
Page 2
WARNINGS – Before using the tool, carefully read the instructions in this manual. – When operating the tool, keep hands away from the danger zone. – Always wear safety gloves when operating.
Page 3
HTEPE.DET12 system consists of: HTEPE.DET16 system consists of: – Pump unit – Pump unit – Hydraulic head type RHTEPE-S – Hydraulic head type RHTEPE-S16 – Plunger type OG 13.2T (qty 2) – Plunger type OG 16.2T (qty 2) – GO / NO GO gauge type CAL 22.23 –...
Page 4
2.2) Installation procedure for AR61, AR65, AR6116, AR6516 rail web electrical connections – Drill rail web or, if already drilled, use a suitable reamer to clean the hole (Fig. 1). – Check the size of the hole with the CAL 22.23 “GO/NO GO” gauge (Fig. 2a): - The hole size is correct if only the green part enters the hole.
Page 6
2.4) Installation procedure for AR261, AR265, AR26116, AR26516 rail web electrical connections – Drill rail web or, if already drilled, use a suitable reamer to clean the hole (Fig. 1). – Check the size of the hole with the CAL 22.23 “GO/NO GO” gauge (Fig. 2a): - The hole size is correct only if the green part enters the hole.
Page 8
As a result their life span is limited. In order to ensure safe use of their units, Cembre recommends replacing the hose within 10 years from the date printed on the fi ttings.
Page 9
c – Remove reservoir cap (03). d – Operate moveable handle (26) several times, in order to advance the ram (01). e – Press the pressure release lever (20) to retract the ram, discharge oil pressure from the circuit and return all oil to the reservoir. f –...
Page 10
38 5/32" BALL 6160070 19 BODY 6760120 39 7/32"BALL The guarantee is void if parts used are not Cembre original spares. When ordering spare parts always specify the following: - code number of item - name of item - type of tool...
Page 12
16 RHTEPE-S12 WASHER 6800156 17 PROTECTION CAP The items ( ) are those Cembre recommend replacing if the head is disassembled. The guarantee is void if parts used are not Cembre original spares. When ordering spare parts always specify the following:...
Page 14
Centre; if possible, attach a copy of the Test Certifi cate supplied by Cembre together with the tool or fi ll in and attach the form available in the “ASSISTANCE” section of the Cembre website.
Page 16
CS 92014 - 91423 Morangis Cédex E-mail: sales@cembre.co.uk E-mail: info@cembre.fr www.cembre.co.uk www.cembre.fr Cembre Inc. Cembre España S.L.U. Raritan Center Business Park Calle Verano 6 y 8 181 Fieldcrest Avenue 28850 Torrejón de Ardoz - Madrid (España) Edison, New Jersey 08837 (USA) Teléfono: 91 4852580...