Advertisement
Quick Links
Advertisement
Related Manuals for Cembre HTEPE.DET10
Summary of Contents for Cembre HTEPE.DET10
- Page 1 HYDRAULIC TOOL HTEPE.DET10 ENGLISH OPERATION AND MAINTENANCE MANUAL...
- Page 2 WARNINGS – Before using the tool, carefully read the instructions in this manual. – When operating the tool, keep hands away from the danger zone. – Always wear safety gloves when operating.
-
Page 3: General Characteristics
HTEPE.DET10 system consists of: – Pump unit – Hydraulic head type RHTEPE-S16 – Plunger type OG10.5C (qty 2) – GO / NO GO gauge type CAL135.145 – Adaptor M9M8 – Plastic case VAL-P14 1. GENERAL CHARACTERISTICS – Application range: suitable for installing rail web electrical connection system into rail web thickness 19-20 mm (e.j. - Page 4 2.2) Installation procedure for rail web electrical connection – Drill rail web to 13,5 mm or, if already drilled, use a suitable reamer to clean the hole (Fig. 1). Ø – Check the size of the hole with the CAL135.145 “GO/NO GO” gauge (Fig. 2): - The hole size is correct if only the green part enters the hole.
- Page 5 FIG. 4 FIG. 5 FIG. 6 cable fl at washer screw copper bush self-locking FIG. 7 FIG. 8...
-
Page 6: Maintenance
As a result their life span is limited. In order to ensure safe use of their units, Cembre recommends replacing the hose within 10 years from the date printed on the fi ttings. - Page 7 4.2) Oil top up Every six months check the oil level in the reservoir. If necessary, top up the oil level to the upper lip of the reservoir and remove all air from the reservoir, see 4.1, points a, b, c, and e, fi nally, complete with operations h and i.
- Page 8 38 5/32" BALL 6160070 19 BODY 6760120 39 7/32"BALL The guarantee is void if parts used are not Cembre original spares. When ordering spare parts always specify the following: - code number of item - name of item - type of tool...
- Page 9 FIG. 10 LONGITUDINAL SECTION...
- Page 10 14 RHTEPE-S16 WASHER 6800156 15 PROTECTION CAP The items () are those Cembre recommend replacing if the head is disassembled. The guarantee is void if parts used are not Cembre original spares. When ordering spare parts always specify the following:...
-
Page 11: Return To Cembre For Overhaul
Centre; if possible, attach a copy of the Test Certifi cate supplied by Cembre together with the tool or fi ll in and attach the form available in the “ASSISTANCE” section of the Cembre website. - Page 12 CS 92014 - 91423 Morangis Cédex E-mail: sales@cembre.co.uk E-mail: info@cembre.fr www.cembre.co.uk www.cembre.fr Cembre Inc. Cembre España S.L.U. Raritan Center Business Park Calle Verano 6 y 8 181 Fieldcrest Avenue 28850 Torrejón de Ardoz - Madrid (España) Edison, New Jersey 08837 (USA) Teléfono: 91 4852580...