Table of Contents
Advertisement
3.3
Handling
Once you have removed the outer packaging,
proceed as follows to unpack and handle the
combination storage cylinder.
b
a
Fig. 3.3
Make sure that any lifting equipment is of ade-
quate capacity to lift and move the storage
cylinder.
Proceed as follows to remove the storage
cylinder from the pallet.
- Place a platform of about half the height of
the pallet near the storage cylinder. Make
sure the platform is able to support the
weight of the storage cylinder.
- Remove the brackets then carefully rotate
and slide the storage cylinder off the pallet
on to the platform.
- Make sure that the storage cylinder is per-
fectly stable, and then remove the pallet.
- Carefully rotate and slide the storage cylin-
der off the platform on to the floor.
- Remove the platform. Position the storage
cylinder as required.
Fit the feet provided into the holes in the
bottom of the storage cylinder and adjust as
necessary to compensate for any unevenness
in the floor.
17
Wear suitable personal protective equip-
ment and use suitable safety devices.
Do not leave packaging material with-
in the reach of children, since it can
become a potential hazard.
11
Advertisement
Table of Contents
