Handling - Beretta IDRA N DS Installation And Operation Manual

Solar storage cylinder
Hide thumbs Also See for IDRA N DS:
Table of Contents

Advertisement

MODELS IDRA N DS 2600
B
IDRA N DS
packages:
- The first contains the painted cylinder, protected by
a plastic bag and arranged vertically on a wooden
pallet.
- The second package, supplied separately and also
protected by a plastic bag, contains the polyurethane
insulation with its elegant outer covering, fitting insu-
lation sleeves, top cover, flange cover, identification
plates and documentation.
The following items are delivered in a plastic bag inside the
packaging:
- Instruction manual
- Bar code labels
- Hydraulic test certificate
The two magnesium anodes are supplied in a cardboard
box on the pallet.
Vertical
H
12
A
A (mm)
IDRA N DS
2600
1300
b
The instruction manual is an integral part of the so-
lar storage cylinder. Once located, read it thoroughly
and keep it safe.
storage cylinders come in two separate
B
B (mm)
H (mm)
1300
2525

11 HANDLING

b
Wear suitable personal protective equipment and use
suitable safety devices.
b
Make sure that any lifting equipment is of adequate
capacity to lift and move the storage cylinder.
a
Do not dispose of packaging material into the envi-
ronment, or leave it within the reach of children, since
it can become a potential hazard. Dispose of packa-
ging material in compliance with applicable legisla-
tion.
MODELS IDRA N DS 1500
Cut the strap (1) located under the insulation at the zips to
remove the cylinder from the pallet.
1
If suitable equipment is not on hand to lift the storage cylin-
der off the pallet using the eyebolt, proceed as follows.
- Place a platform of about half the height of the pallet
near the storage cylinder. Make sure the platform is
Weight
(kg)
able to support the weight of the storage cylinder
- Remove the strap (1) then carefully rotate and slide
620
the storage cylinder off the pallet on to the platform
- Make sure that the storage cylinder is perfectly
stable, and then remove the pallet
- Carefully rotate and slide the storage cylinder off the
platform on to the floor
- Remove the platform. Position the storage cylinder as
required.
1

Advertisement

Table of Contents
loading

Table of Contents