Led Statuses; Arrangement Of The Leds On The F-Cm As-I Safety St - Siemens SIMATIC ET 200SP Manual

Alarm, fault, and system events

8.2 LED statuses

8.2 LED statuses
8.2.1

Arrangement of the LEDs on the F-CM AS-i Safety ST

Introduction
LEDs on the front plate of the respective module display module-internal and module-
external faults. The LEDs and their evaluation are described in the manuals for the relevant
modules of the SIMATIC devices.
DIAG
STATUS
Error
CFG
PSF
Teach
ADDR
PWR
Figure 8-1
84
Diagnosis
Operating state of the module
Operating state of the module
Fault on the AS-i bus
Process signal error, e.g.,channel fault on AS-i-F input slave
Teaching: Teaching of code sequences
Addressing of the F-CM AS-i Safety ST module. F-addressing and teaching. The LED
indicates whether the module is conducting safety-relevant communication with the
software tool.
Supply voltage
LEDs of F-CM AS-i Safety ST
Fail-safe Module F‑CM AS‑i Safety ST (3RK7136‑6SC00‑0BC1)
Manual, 03/2017, A5E03957059020A/RS-AB/002