Code sequences
7.3 Final steps
7.3
Final steps
7.3.1
Reintegrating passivated input channels
The input channels of the F-CM AS-i Safety ST module for which no valid code sequences
are saved supply the substitute value "0" and are passivated.
After the transfer of the code sequences, the passivated channels must be reintegrated so
that the application can work with the real process values.
The procedure for this can be found in the following Programming and Operating Manuals:
● SIMATIC Safety - Configuring and Programming
(http://support.automation.siemens.com/WW/view/en/54110126/0/en)
● S7 Distributed Safety
(http://support.automation.siemens.com/WW/view/en/22099875/0/en)
After transferring the code sequences, check the safety equipment for proper functioning.
82
Fail-safe Module F‑CM AS‑i Safety ST (3RK7136‑6SC00‑0BC1)
Manual, 03/2017, A5E03957059020A/RS-AB/002