SATO MB200i Operator's Manual page 20

Setup
Notes:
• If the POWER lamp does not light when plugged in,
check the power cord connection.
• If the CHARGE lamp does not light at the start of
charging, ensure the battery pack is properly
inserted into the charger. Also ensure the contacts
are clean and undamaged.
• When a fully charged battery pack is placed into the
battery charger, the CHARGE lamp turns on and
then off. In the case of the five-socket charger, the
CHARGE lamp lights green.
• When charging a battery pack that has not been
used for an extended period, the CHARGE lamp
may blink for a while. This does not indicate an error
and charging can continue.
• The battery pack may be recharged 300 times or
more when used under normal circumstances. If the
battery pack is fully charged but runs out quickly,
replace it with a new battery.
Charging Time
Approximately 2.5 hours is required for a fully
discharged battery pack to return to a fully charged
state.
2-6