Printing Procedure - SATO MB200i Operator's Manual

Operation and Configuration

Printing Procedure

After completing the proper setup and basic
configuration procedures, the printer is ready for
use.
1. Ensure the host computer is
ready to transmit data and
the STATUS LED is blinking
green. If ONLINE is not
displayed on the LCD,
press the PRINT button to
take the printer ONLINE.
2. Start the print job from the
computer. When printing is
finished, grasp either corner
of the printed label(s) and
tear it off in the direction of
the arrow in the diagram.
Notes
• The number of sheets you can print is determined
by the printer's mode (continuous or peel mode).
• When a linerless label has been torn in the wrong
place, discontinue printing and follow the
instructions on the next page to correct the print job.
3-9