SATO MB200i Operator's Manual page 21

Charging the battery pack from the printer
Follow the steps below to charge the supplied battery
pack from the printer using an AC Adapter:
1. Remove the printer's DC
input jack cover and
connect the charger's DC
output terminal to its
connector.
2. Connect the AC adapter
to the wall outlet and
power on. The POWER
lamp on the adapter
lights green.
The battery indicator on
the printer lights red indicating that charging has
begun. When the battery pack is fully charged, the
battery indicator will turn off.
In the case of the MB200 Wireless LAN interface
model, the CHARGE LED on the LCD screen
lights red when charging begins, and terminates
when charging is complete.
Charging Time
With the AC adapter, appoximately 5 hours is required to
reach full charge from a fully discharged state.
Setup
2-7