Printing Via The Irda Interface - SATO MB200i Operator's Manual

Operation and Configuration

Printing via the IrDA Interface

Use the following procedure to print through
IrDA interface.
1. Place the printer 20 cm away from the IrDA port of
the computer or handheld device. Adjust the printer
position so that the center of its IrDA filter projects
a 30° conical area which contains the IrDA
transceiver of the computer or handheld device.
IrDA communication is limited to a 15 to 20 cm range.
The usable range may vary depending on the usage
environment, or the capabilities of other IrDA devices.
Communication is compromised by direct sunlight or
ambient light. In such a case, block the strong light from
entering the IrDA filter, or reduce the distance between the
two IrDA ports.
For proper dipswitch configuration, refer to chapter 4.
3-4