SATO MB200i Operator's Manual page 40

Operation and Configuration
Adjusting printing for linerless labels or
journal paper
When the media has been torn in the wrong
location, proceed as follows.
1. Interrupt printing from the
computer or by pressing
the PRINT key while in
the ONLINE state to take
the printer OFFLINE
(STATUS LED goes off).
2. Press the FEED button to
feed a media (may
require multiple feeds).
When the feeding stops,
correctly tear off the
media by pulling the
media in the direction of
the arrow shown in the
diagram. The media is
now properly aligned for printing to resume.
3. Press the PRINT button to return to the online state
(STATUS LED lights green). Printing can now be
resumed.
3-10