SATO MB200i Operator's Manual page 46

Operation and Configuration
Printer modes (cont'd)
Online Command Compatibility Mode
The printer can be set for compatibility with SBPL
commands or with the older MB200 commands.
Setting Online Command compatibility
(cover must be left open)
Compatibility DSW-1 DSW-2
MB200 ON ON
online commands
SBPL ON ON
online commands
You can check the current setting with a test printout
as described in "Performing a Test Print" on page 2.
When setting the online command compatibility
options, the STATUS LED blinks green, and turns into
a steady green signal upon setup completion. Power
off the printer only when the STATUS LED is a steady
green light.
3-16
DSW-3 DSW-4 Other keys
ON ON hold down PRINT
button
ON ON hold down FEED
button