HP MSR2003 Configuration Manual page 167

Configure Loopback 0 as the C-BSR and C-RP of the related PIM-SM domain on Router A, Router D
•
and Router G.
According to the peer-RPF forwarding rule, the routers accept SA messages that pass the filtering
•
policy from its static RPF peers. To share multicast source information among PIM-SM domains
without changing the unicast topology structure, configure MSDP peering relationships for the RPs
of the PIM-SM domains and configure the static RPF peering relationships.
Figure 53 Network diagram
AS 100
Receiver
Loop0
GE2/1/2
GE2/1/1
Router A
GE2/1/2
Router B
Source 1
PIM-SM 1
BGP peers
Table 13 Interface and IP address assignment
Device Interface
Source 1 —
Source 2 —
GigabitEthernet
Router A
2/1/1
GigabitEthernet
Router A
2/1/2
Router A Loopback 0
GigabitEthernet
Router B
2/1/1
GigabitEthernet
Router B
2/1/2
GigabitEthernet
Router B
2/1/3
AS 200
Router C
GE2/1/2
GE2/1/3
IP address
192.168.1.100/24
192.168.3.100/24
10.110.1.1/24
10.110.2.1/24
1.1.1.1/32
10.110.1.2/24
192.168.1.1/24
10.110.3.1/24
157
PIM-SM 3
GE2/1/1
GE2/1/1
Router F
Receiver
PIM-SM 2
Router D
GE2/1/1
GE2/1/1
Loop0
Source 2
Device Interface
GigabitEthernet
Router D
2/1/1
GigabitEthernet
Router D
2/1/2
Router D Loopback 0
GigabitEthernet
Router E
2/1/1
GigabitEthernet
Router E
2/1/2
GigabitEthernet
Router F
2/1/1
GigabitEthernet
Router F
2/1/2
GigabitEthernet
Router G
2/1/1
Router G
Loop0
Router E
IP address
10.110.5.1/24
10.110.3.2/24
2.2.2.2/32
10.110.5.2/24
192.168.3.1/24
10.110.6.1/24
10.110.4.2/24
10.110.6.2/24