HP MSR2003 Configuration Manual page 174

# Send an IGMP report from Host A to join the multicast group 225.1.1.1. (Details not shown.)
# Send multicast data from Source 1 10.1 10.5.100/24 to the multicast group 225.1.1.1. (Details not
shown.)
# Display the PIM routing table on Router D.
[RouterD] display pim routing-table
No information is output on Router D.
# Display the PIM routing table on Router B.
[RouterB] display pim routing-table
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
RP: 10.1.1.1 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:15:04
Upstream interface: Register
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet2/1/1
Protocol: igmp, UpTime: 00:15:04, Expires: -
(10.110.5.100, 225.1.1.1)
RP: 10.1.1.1 (local)
Protocol: pim-sm, Flag: SPT 2MSDP ACT
UpTime: 00:46:28
Upstream interface: GigabitEthernet2/1/2
Upstream neighbor: 10.110.2.2
RPF prime neighbor: 10.110.2.2
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet2/1/1
Protocol: pim-sm, UpTime:
The output shows that Router B now acts as the RP for Source 1 and Host A.
# Send an IGMP leave message from Host A to leave the multicast group 225.1.1.1. (Details not shown.),
# Send an IGMP report from Host B to join the multicast group 225.1.1.1. (Details not shown.)
# Send multicast data from Source 2 to the multicast group 225.1.1.1. (Details not shown.)
# Display the PIM routing table on Router B.
[RouterB] display pim routing-table
No information is output on Router B.
# Display PIM routing information on Router D.
[RouterD] display pim routing-table
Total 1 (*, G) entry; 1 (S, G) entry
- , Expires: -
164