HP MSR2003 Configuration Manual page 325

[RouterA-GigabitEthernet2/1/1] mld enable
[RouterA-GigabitEthernet2/1/1] quit
# Enable IPv6 PIM-DM on GigabitEthernet 2/1/2.
[RouterA] interface gigabitethernet 2/1/2
[RouterA-GigabitEthernet2/1/2] ipv6 pim dm
[RouterA-GigabitEthernet2/1/2] quit
# Enable IPv6 multicast routing, MLD, and IPv6 PIM-DM on Router B and Router C in the same way
Router A is configured. (Details not shown.)
# On Router D, enable IPv6 multicast routing and enable IPv6 PIM-DM on each interface.
<RouterD> system-view
[RouterD] ipv6 multicast routing
[RouterD-mrib6] quit
[RouterD] interface gigabitethernet 2/1/1
[RouterD-GigabitEthernet2/1/1] ipv6 pim dm
[RouterD-GigabitEthernet2/1/1] quit
[RouterD] interface gigabitethernet 2/1/2
[RouterD-GigabitEthernet2/1/2] ipv6 pim dm
[RouterD-GigabitEthernet2/1/2] quit
[RouterD] interface gigabitethernet 2/1/3
[RouterD-GigabitEthernet2/1/3] ipv6 pim dm
[RouterD-GigabitEthernet2/1/3] quit
[RouterD] interface gigabitethernet 2/1/4
[RouterD-GigabitEthernet2/1/4] ipv6 pim dm
[RouterD-GigabitEthernet2/1/4] quit
Verifying the configuration
# Display IPv6 PIM information on Router D.
[RouterD] display ipv6 pim interface
Interface
GE2/1/1
GE2/1/2
GE2/1/3
GE2/1/4
# Display IPv6 PIM neighboring relationship on Router D.
[RouterD] display ipv6 pim neighbor
Total Number of Neighbors = 3
Neighbor
FE80::A01:101:1 GE2/1/2
FE80::B01:102:2 GE2/1/3
FE80::C01:103:3 GE2/1/4
# Send an MLD report from Host A to join the IPv6 multicast group FF0E::101. (Details not shown.)
NbrCnt HelloInt
0 30
0 30
1 30
1 30
Interface
DR-Pri DR-Address
1 FE80::A01:201:1
(local)
1 FE80::A01:201:2
(local)
1 FE80::A01:201:3
(local)
1 FE80::A01:201:4
(local)
Uptime Expires Dr-Priority
00:04:00 00:01:29 1
00:04:16 00:01:29 3
00:03:54 00:01:17 5
315