HP MSR2003 Configuration Manual page 205

# Assign an IP address to the public network interface GigabitEthernet 2/1/1, and enable
PIM-SM, MPLS capability, and LDP capability on the interface.
[PE2] interface gigabitethernet 2/1/1
[PE2-GigabitEthernet2/1/1] ip address 192.168.7.1 24
[PE2-GigabitEthernet2/1/1] pim sm
[PE2-GigabitEthernet2/1/1] mpls enable
[PE2-GigabitEthernet2/1/1] mpls ldp enable
[PE2-GigabitEthernet2/1/1] quit
# Bind GigabitEthernet 2/1/2 with VPN instance b, assign an IP address to GigabitEthernet
2/1/2, and enable PIM-SM on the interface.
[PE2] interface gigabitethernet 2/1/2
[PE2-GigabitEthernet2/1/2] ip binding vpn-instance b
[PE2-GigabitEthernet2/1/2] ip address 10.110.3.1 24
[PE2-GigabitEthernet2/1/2] pim sm
[PE2-GigabitEthernet2/1/2] quit
# Bind GigabitEthernet 2/1/3 with VPN instance a, assign an IP address to GigabitEthernet
2/1/3, and enable PIM-SM on the interface.
[PE2] interface gigabitethernet 2/1/3
[PE2-GigabitEthernet2/1/3] ip binding vpn-instance a
[PE2-GigabitEthernet2/1/3] ip address 10.110.4.1 24
[PE2-GigabitEthernet2/1/3] pim sm
[PE2-GigabitEthernet2/1/3] quit
# Assign an IP address to Loopback 1, and enable PIM-SM on this interface.
[PE2] interface loopback 1
[PE2-LoopBack1] ip address 1.1.1.2 32
[PE2-LoopBack1] pim sm
[PE2-LoopBack1] quit
# Configure BGP.
[PE2] bgp 100
[PE2-bgp] group vpn-g internal
[PE2-bgp] peer vpn-g connect-interface loopback 1
[PE2-bgp] peer 1.1.1.1 group vpn-g
[PE2-bgp] peer 1.1.1.3 group vpn-g
[PE2–bgp] ip vpn-instance a
[PE2-bgp-a] address-family ipv4
[PE2-bgp-ipv4-a] import-route rip 2
[PE2-bgp-ipv4-a] import-route direct
[PE2-bgp-ipv4-a] quit
[PE2-bgp-a] quit
[PE2–bgp] ip vpn-instance b
[PE2-bgp-b] address-family ipv4
[PE2-bgp-ipv4-b] import-route rip 3
[PE2-bgp-ipv4-b] import-route direct
[PE2-bgp-ipv4-b] quit
[PE2-bgp-b] quit
[PE2–bgp] address-family vpnv4
[PE2–bgp-vpnv4] peer vpn-g enable
[PE2–bgp-vpnv4] quit
195