Section 8
Troubleshooting
8.2.3
8.3
8.3.1
80
Table 16:
Warning indications
Warning indication
Warning
IEC 61850 Error
Warning
GOOSE Error
Warning
DNP3 Error
Additional indications
The additional indication messages do not activate internal fault or warning.
The messages are listed in the LHMI menu under the event list. The signal status
data is found under the IED status and in the internal event list.
Table 17:
Additional indications
Warning indication
Time Synch Error
Settings Changed
Setting Groups Changed
Correction procedures
Creating user accounts and setting and changing
passwords
If Central Account Management is disabled in the IED, user account creation,
initial password setting and password changing is done using PCM600.
If Central Account Management is enabled in the IED, user account creation and
initial password setting is done using the SDM600 server. Individual users can then
change their passwords via PCM600 or the LHMI.
For more information, see PCM600 documentation or the Cyber
security deployment guidelines.
Additional information
IEC 61850 has not succeeded
in some actions such as
reading the configuration file,
startup etc.
One or more access point is
not able to run GOOSE due to
GOOSE being deactivated on
the access point, or the
access point being
deactivated or failing.
Error in DNP3
communication.
Additional information
Source of the time synchronization is lost or time
system has made a time reset.
Settings have been changed.
Setting group has been changed.
1MRK 500 128-UEN B
GUID-69561C77-50E8-45E2-B8AC-80116222B5B9 v3
GUID-D3FA85BA-1E36-4F8B-BD71-85C7AC46A0B4 v2
650 series 2.2 IEC
Operation manual