Using The Single-Line Diagram - ABB Relion 650 Series Operation Manual

1MRK 500 128-UEN B
5.1.11
650 series 2.2 IEC
Operation manual
GUID-C98D972D-D1D8-4734-B419-161DBC0DC97B V1 EN-US
Figure 25: Function button panel
2. Press the wanted function button.
• Press the wanted function button to jump to a certain menu item.
The menu opens immediately upon pressing the button.
• Press the wanted function button for at least 0.5 s to initiate a control
signal. The action is taken once.
To repeat the action, press the button again. If the button is pressed less
than 0.5 s, no action is taken.
3.
Press to close the function button panel.
The panel is also closed after pressing a function button configured for a
menu shortcut.
The function buttons are configured with PCM600.

Using the single-line diagram

The single-line diagram is created with PCM600.
1. Select Main menu/Control/Single line diagram.
The single-line diagram view is displayed.
Section 5
Using the HMI
IEC13000281-1-en.vsd
GUID-72AC5BD6-D1B5-46D4-83B9-A10870125FCF v7
47