Editing Enumerated Values; Changing Time Settings In Lhmi; Saving Settings - ABB Relion 650 Series Operation Manual

Section 5
Using the HMI
5.1.13.3
5.1.13.4
5.1.14
52
IEC15000063 V1 EN-US
4. Edit the string using the on-screen keyboard.
5.
Select OK on the on-screen keyboard or press
field is focused to accept the entered string is accepted and the editing dialog
is closed.

Editing enumerated values

1. Activate the setting mode and select a setting.
When editing an enumerated value, the selected value is shown inverted.
2.
Press or to change the value of an active enumerated value.
One press changes the enumerated value by one step in the parameter specific
order.

Changing time settings in LHMI

If there is a need to change the time setting in the LHMI (Main menu/
Configuration/Time/System time/SYSTEMTIME:1) the change will take affect
immediately. To confirm the new setting press
.

Saving settings

Editable values are stored in the non-volatile flash memory. Most of the parameter
changes take effect immediately after storing, but some parameter changes require
application restart. Values stored in the flash memory remain in effect after reboot
as well.
1.
Press to confirm any changes.
2.
Press to move upwards in the menu tree or
3.
To save the changes in non-volatile memory, select Yes and press
1MRK 500 128-UEN B
IEC15000063.vsdx
while the string editing
GUID-0EE1EA01-D75F-4F3E-825F-ACD59D5A160F v3
. To remove the change, press
GUID-80F52D5D-539E-478E-97AC-4E33897E5085 v6
to enter the Main Menu.
650 series 2.2 IEC
Operation manual
AMU0600417 v6
.