Section 7
Operating procedures
7.2
7.2.1
68
For more information, see PCM600 documentation.
Controlling
Controlling circuit breakers and disconnectors
The primary equipment can be controlled via the LHMI with the Open and Close
buttons when the IED is set to local control mode and the user is authorized to
access control operations.
1.
Select Main menu/Control/Single line diagram.
The SLD displays all controllable objects configured to the SLD.
2.
Select an object with
Selection of object is indicated with a square border that moves when
are used.
Switch objects can have additional icons that present the switch object states.
Switch object is in substituted state.
Switch object is interlocked.
3.
Press
to select open or
4.
Press
to confirm the operation.
IEC10000340 V3 EN-US
Figure 42:
Opening a circuit breaker
•
Press
to cancel the operation.
5.
Press
or
to move between single-line diagram pages.
or
.
to select close the object.
IEC10000340-3-en.vsd
1MRK 500 128-UEN B
GUID-921AE9B2-0CA3-46E8-A52C-55E15D06A50A v6
and
650 series 2.2 IEC
Operation manual