Browsing And Editing Setting Group Values - ABB Relion 650 Series Operation Manual

1MRK 500 128-UEN B
7.4.1.2
650 series 2.2 IEC
Operation manual
Remember to document the changes you make.

Browsing and editing setting group values

1.
Select Main menu/Settings/IED Settings and press
Setting group 1 is the default setting group to be edited.
IEC13000054-2-en.vsd
IEC13000054 V2 EN-US
Figure 45: Selecting a setting group for editing
2.
Press on the Setting group line in the dialog box to activate
selection mode.
3.
Select the wanted setting group with
IEC13000241-1-en.vsd
GUID-5196A07A-9DAF-4696-8773-F52ADC155C44 V1 EN-US
Figure 46: Changing the setting group
4.
Select Yes in the dialog, and press
The current setting group is displayed on the left in the header.
5.
Select the application function category in the list with
to see the function blocks in that category.
Categories available in the list depend on the configuration configured with
PCM600.
Operating procedures
GUID-5624E7E4-1D14-469A-BF86-8BD560B72F9D v5
.
or and press .
to continue.
or
Section 7
, and press
71