Section 7 Operating Procedures; Monitoring; Indications; Using Auto-Indication Messages - ABB Relion 650 Series Operation Manual

1MRK 500 128-UEN B
Section 7
7.1
7.1.1
7.1.1.1
650 series 2.2 IEC
Operation manual
Operating procedures

Monitoring

Indications

The operation of the IED can be monitored via three different indications on the
LHMI.
• Three indicator LEDs with fixed functionality: Ready, Start and Trip
• 15 programmable three-color alarm LEDs which can present 45 virtual LED
states
• For each on state LED color and for the LED off state, texts can be
programmed with PCM600 and via LHMI. These texts are displayed on
the LHMI.
• An auto-indicating message on the display.

Using auto-indication messages

Auto-indication messages are shown in a dialog box that is displayed when the
disturbance recorder is triggered. The indication dialog box shows a list of current
disturbance recordings one by one. To scroll the dialog, use
To activate the auto-indication message function, the disturbance
recorder function has to be activated and properly configured.
Check also that the setting Main menu/Configuration/HMI/
Screen/SCREEN:1/AutoIndicationDRP is set to On.
1. Read the auto-indication message in the dialog box.
The message contains the same information that is available for disturbance
recordings.
2.
Press to see more detailed information.
3.
Press to close the auto-indication message without clearing it or press
to activate the Clear view and to clear messages.
Section 7
Operating procedures
GUID-E3CC6AB4-D6C4-4504-A0F2-CA76EA3D7FCD v10
and .
AMU0600430 v9
61