1MRK 500 128-UEN B
6.2.5
6.3
650 series 2.2 IEC
Operation manual
Only authorized and skilled personnel should analyze the errors and
decide on further actions.
The IED records IED status data and events.
Document all the recorded data from the IED before resetting the
tripping and IED lockout functions.
Non-operative functions
Protection and control functions can be non-operative if:
•
function is not turned on, that is, Operation = Off.
•
function is connected to bad or lost input data from MU.
•
function is set to a non-operative state by IEC 61850.
Non-operative functions, functions that are blocked due to bad or lost data from
MU and functions set to a non-operative state by IEC 61850 are listed on the
LHMI under Main menu/Test/Function overview.
IEC16000253 V1 EN-US
IED parameterization
IED parameters are set via the LHMI or PCM600.
Setting parameters need to be calculated according to the electrical network
conditions and the electrical characteristics of the protected equipment. The IED's
settings need to be verified before the IED is connected to a system.
IEC16000253-1-en.vsdx
Section 6
IED operation
GUID-752CDABC-4F21-4A02-AF77-F8AD0165F1DD v2
GUID-F3F7C6D0-1A2B-487B-8291-C5C346F56C3E v9
59