Activating Leds - ABB Relion 650 Series Operation Manual

1MRK 500 128-UEN B
7.4.2
650 series 2.2 IEC
Operation manual
• In case of a parameter that is not part of a setting group, the parameter is
activated for editing.
• In case of a setting group parameter, the editing dialog shows the value
of the setting in all available setting groups, but the user can edit only
the value in the selected setting group. The active setting group is
marked with an asterisk *.
IEC13000049 V2 EN-US
Figure 49:
10. Press
or to change the value.
11. Confirm the change with

Activating LEDs

To activate the LEDs, they must be configured with PCM600.
1.
Select Main menu/Configuration/HMI/LEDs and press
Changing the setting value
.
Section 7
Operating procedures
IEC13000049-2-en.vsd
GUID-C63971C7-EDC8-40BA-B53B-7377AA33FCC5 v6
.
73