Clearing And Acknowledging - ABB Relion 650 Series Operation Manual

1MRK 500 128-UEN B
5.1.15
650 series 2.2 IEC
Operation manual
IEC13000245-1-en.vsd
GUID-8D804426-35FD-48A8-9E63-CCBB625327EA V1 EN-US
Figure 32: Confirming settings
•
To exit without saving changes, select No and press
•
To cancel saving settings, select Cancel and press
Pressing Cancel in the Save changes dialog closes only the Save
changes dialog box, but the IED remains in editing mode. All the
changes applied to any setting are not lost and the user can continue
to change settings. To leave the change setting mode, select No or
Yes in the Save changes dialog.
After changing the parameters marked with !, the IED restarts
automatically for the changes to take effect.

Clearing and acknowledging

The Clear button is used to reset, acknowledge or clear all messages and
indications, including LEDs and latched outputs as well as registers and recordings.
Press the Clear button to activate a selection menu, and select the wanted clearance
or reset function. Events and alarms assigned to alarm LEDs are cleared with the
Clear button as well.
1.
Press to activate the Clear view.
Section 5
Using the HMI
.
.
AMU0600425 v10
53