Leds; Settings - ABB BAMU-12C Hardware Manual

Connector Description
XU1
Voltage measurement connector. For pin descriptions, see section
connections (XU1, XU2) (page
XU2
Voltage measurement connector. For pin descriptions, see section
connections (XU1, XU2) (page
XIU
Current measurement connector. For pin descriptions, see section
connections (XIU, XIV, XIW) (page
XIV
Current measurement connector. For pin descriptions, see section
connections (XIU, XIV, XIW) (page
XIW
Current measurement connector. For pin descriptions, see section
connections (XIU, XIV, XIW) (page
V1R Fiber optic connector
V1T Fiber optic connector
XPOW
Power supply connector. For pin descriptions, see section
(XPOW) (page

LEDs

LED Color
POWER Green
LINK FAULT Red
U2 > 60 V Yellow
U1 > 60 V Yellow

Settings

See the firmware manual of the appropriate control program for the firmware settings, eg,
selection between phase or main voltage measurement, etc.
There are no hardware settings on the measurement unit.
18).
18).
19).
19).
19).
19).
Description
Power on
Fiber optic link fault
Input U2 voltage exceeds 60 V
Input U1 voltage exceeds 60 V
Hardware description 13
Voltage measurement
Voltage measurement
Current measurement
Current measurement
Current measurement
Power supply connection