5 Installation Procedure
6.
Connect the ground cable from the drive ground terminal to the CC-Link Option
ground. When wiring the CC-Link Option, pass the ground cable through the inside
of the drive bottom cover, then pass the ground cable into the through-hole at the
front of the CC-Link Option.
Figure 9
through-hole
for ground cable
7.
Connect the communications cable to the terminal block. Refer to Procedure on
page 21.
8.
Attach the CC-Link Option cover to the front of the CC-Link Option.
Figure 10
Note: When using the drive in an area that may require displaying warning information in Japanese or
Chinese, a sticker has been provided with the CC-Link Option. This sticker can be placed over
the English and French warnings on the front of the CC-Link Option.
20
ground cable
ground cable
Figure 10 Ground Cable Connection
Figure 11 Attach Cover
YASKAWA ELECTRIC TOBP C730600 22B V1000 Option CC-Link Installation Manual
drive ground terminal
Pass the ground cable through
the bottom cover of the drive.
tabs should line up