YASKAWA V1000 Installation Manual page 18

Figure 6
Note: Cover removal for certain larger models with a Terminal Cover:
-Single-Phase 200 V Class: CIMR-V BA0006 to BA0018
-Three-Phase 200 V Class: CIMR-V 2A0008 to 2A0069
-Three-Phase 400 V Class: All models
Remove the terminal cover before removing the bottom cover to install the CC-Link Option.
Replace the terminal cover after wiring the CC-Link Option.
Figure 7
4.
Reattach the bottom cover.
5.
Connect the CC-Link Option to the drive. Properly secure the tabs on the left and
right sides of the CC-Link Option to the drive case.
Figure 8
YASKAWA ELECTRIC TOBP C730600 22B V1000 Option CC-Link Installation Manual
A
A – Option unit connection: screw size = M3
B – Drive-side connection: screw size = M3.5 to M6
Figure 7 Ground Cable
Figure 8 Models with Terminal Cover
tabs should line up
Figure 9 Attach CC-Link Option
5 Installation Procedure
B
tabs should line up
19