Receiving - YASKAWA V1000 Installation Manual

3

Receiving

Please perform the following tasks after receiving the CC-Link Option:
• Inspect the CC-Link Option for damage.
If the CC-Link Option appears damaged upon receipt, contact the shipper
immediately.
• Verify receipt of the correct model by checking the information on the nameplate (see
Figure 2).
• If you have received the wrong model or the CC-Link Option does not function properly,
contact your supplier.
◆
Contents and Packaging
Description: Option Unit
_
Quantity:
◆
Tool Requirements
A Phillips screwdriver (M3, M3.5 to M6
required to install the CC-Link Option.
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
Note: Tools required to prepare CC-Link cables for wiring are not listed in this manual.
YASKAWA ELECTRIC TOBP C730600 22B V1000 Option CC-Link Installation Manual
Table 2 Contents of Package
Ground Cables
1
<1>
Warning Label
Stickers
4
) metric or (#1, #2
3 Receiving
Installation Manual
MANUAL
1
) U.S. standard size is
<1>
1
11