Xm Weather (Optional); Displaying Metar And Taf Information On The Airport Information Page - Garmin G1000 Cockpit Reference Manual

Select the CLEAR Softkey to remove all Stormscope
lightning data from the display.

10.3 XM WEATHER (OPTIONAL)

WARNING: Use of XM weather for hazardous
weather penetration is not recommended.
Weather information provided by XM Radio
Service is approved only for weather avoidance,
not penetration.
1) From the Navigation Map Page, select the MAP
Softkey.
2) Select the NEXRAD or XM LTNG Softkey to display
the desired weather. Press the applicable softkey
again to remove weather data from the Navigation
Map Page.
Figure 10-7 Navigation Map Page Displaying NEXRAD Weather
190-00708-00 Rev. A Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
Displaying METAR and TAF information on the
Airport Information Page
Display METAR and TAF text on the Airport
Information Page:
1) Turn the large FMS Knob to select the WPT Page
Group.
2) Turn the small FMS Knob to select the Airport
Information Page.
3) Select the WX Softkey to display METAR and TAF
text (METAR and TAF information is updated every
12 minutes).
Figure 10-8 METAR and TAF Text Displayed on the
Airport (Weather) Information Page
SECTION 10 – HAZARD
AVOIDANCE
METAR
Text
TAF
Text
WX
Softkey
10-3