To View Information About An Airport; To Activate A Direct-To From The Nearest Airports Window; To Activate A Direct-To From The Airport Information Window; Direct-To Window/Direct-To Navigation - Garmin G1000 Pilot's Manual

SUPPLEMENTAL FLIGHT DATA

To view information about an airport:

Press the NRST softkey to display a list of the
1.
Nearest Airports.
Turn the FMS knob to select the desired airport
2.
and press the ENT key.
3. The airport information is displayed with
'BACK' highlighted at the bottom of the
window. When finished viewing the airport
information, press the ENT key to return to the
nearest airports list.
Figure 3.6.11 Airport Information Window
To select an airport by the airport identifier,
location, and name fields from the Airport
Information window:
1. From the Nearest Airport window, turn the
large FMS knob to highlight the desired field.
Turn the FMS knobs to select the desired loca-
2.
tion, then press the ENT key.
Turn the large FMS knob to highlight 'BACK',
3.
then press the ENT key.
To activate a Direct-to from the Nearest
Airports window:
1. From the Nearest Airports window, turn the
large FMS knob to highlight the desired airport,
then press the Direct-to key. The Direct-to
window appears. Press the ENT key twice to
activate.
3-34
Direct-to Window
pressing the Direct-to key. The currently selected way-
point displays the following information:
done in the following ways:
Garmin G1000 PFD Pilot's Guide for Cessna Nav III
To activate a Direct-to from the Airport
Information window:
1. From the Airport Information window, press
the Direct-to key.
2. Press the ENT key twice to activate.
To select a COM frequency:
1. From the Nearest Airports window, turn the
large FMS knob to highlight the desired fre-
quency, then press the ENT key. The frequency
is tuned in the standby COM frequency field
selected by the tuning box.
The Direct-to window is enabled and disabled by
• Identifier
• Waypoint symbol
• Waypoint location
• Facility name
• Flight plan waypoint list
• Nearest waypoint List
• Bearing to waypoint
• Distance from waypoint
• Latitude/longitude
• Course to selected waypoint
Direct-to Navigation
Selection of a waypoint for Direct-to navigation may be
• By specifying the identifier, waypoint location or
facility name
• By selecting from a list of waypoints in the active
flight plan
• By selecting from a list of the 25 nearest airports
190-00387-02 Rev. A