Create External Character Tab - Toshiba B-EX4T1-G/T Operation Manual

Create External Character Tab

[Specification Method]
Selects the specify method the bitmap file path.
"File": When an external character is created from one bitmap file
"Folder": When an external character is created from more than one bitmap file
Default File
Options File, Folder
[Location]
Selects the type of a memory where the files are stored.
Default Onboard Flash Memory
Options Onboard Flash Memory, USB Memory
[Bitmap Path]
Specifies the location where the bitmap file is stored.
Click the button to show the full path of the specified location.
Only monochrome (black and white) bitmaps are acceptable. One dot of a bitmap is equivalent to one
pixel specified in Paint.
When "File" is selected for [Specification Method], specify one bitmap file from the screen.
If the selected file is not a monochrome bitmap, an error message will be displayed.
If the selected file exceeds the acceptable upper limit of the width or height, an error message will be
displayed.
When "Folder" is selected for [Specification Method], specify a folder in which more than one bitmap file
is stored. The bitmap files in the specified folder are displayed in [Bitmap List] as long as their file
names conform to the format described below.
When no monochrome bitmap file with proper name is found in the specified folder, an error message will
be displayed.