Create External Character Tab - Toshiba B-EX Series Operation Manual

Create External Character Tab

[Specification Method]
How to specify the bitmap file path is selectable.
Select the "File" when an external character is created from one bitmap file.
Select the "Folder" when an external character is created from more than one bitmap file.
Default File
Options File, Folder
[Location]
Select the type of memory where the files are stored.
Default Onboard Flash Memory
Options Onboard Flash Memory, USB Memory
[Bitmap Path]
Specify the location where the bitmap file is stored.
Click the button to show the full path of the specified location.
Only monochrome (black and white) bitmaps are acceptable. One dot of a bitmap is equivalent to one pixel
specified in Paint.
When the "File" is selected for the [Specification Method], specify one bitmap file from the screen.
If the selected file is not a monochrome bitmap, the error message is displayed.
If the selected file exceeds the acceptable upper limit of the width or height, the error message is displayed.
When the "Folder" is selected for the [Specification Method], specify a folder in which more than one bitmap
file is stored. The bitmap files in the specified folder are displayed in the [Bitmap List] as long as their file
names conform to the format described below.
72