[GETCMDZB] group
[Get data form]
Default
Option
Receive buffer:
BASIC Application: If data cannot be converted into a command in Z Mode, a BASIC application
Note: When this option is selected, a BASIC application needs to be changed.
<Button>
[Load]
Reads the settings from a specified file. (Settings of all pages will be read.)
[Save]
Saves the settings in a specified file. (Settings of all pages will be saved.)
[Download]
Downloads the settings to the printer. (Settings of all pages will be downloaded.)
[Get printer param.]
Retrieves the settings from the printer. (Settings of all pages will be retrieved.)
Note:
If no Initial Values & Table files have been sent to the printer before, no data cannot be obtained
from the printer.
[Reset to default]
Restores the all settings to the default.
Receive buffer
Receive buffer, BASIC application
Standard option for Z Mode. (Basically, do not change the setting.)
The converter firmware analyzes the data in the receive buffer and converts
into a command.
is used to modify a received command so that the converter firmware can
convert it into a command.