[Environment] - Toshiba B-EX4T1-G/T Operation Manual

[Environment]

[Language]
Selects a language used to display this Product.
The language selected during the installation has been set as default.
Restart this Product for the changed language to take effect.
After this Product is restarted, all values on all screens, except the [Printer Setting] and [Environment],
are initialized.
Options
[Control Code]
Selects the same control code that is set for the connected printer.
The default value immediately after the installation is "AUTO".
Basically, it is not necessary to change this value as the default for the printer has been selected.
Entering the same value for all of the [Code 1], [Code 2], and [Code 3] results in an error.
If a value improper for the control code is entered, this Product does not work properly.
Options
[Code 1]
Enter the same value in hex. format that is set for the connected printer.
The default right after the installation is "1B".
[Code 1] is editable only when "Manual" is selected for the [Control Code].
Change the value when the control code is set to "Manual" for the printer.
Range
[Code 2]
Enter the same value in hex. format that is set for the connected printer.
The default right after the installation is "0A".
[Code 2] is editable only when "Manual" is selected for the [Control Code].
Change the value when the control code is set to "Manual" for the printer.
Range
Japanese, English
AUTO, [ESC] [LF] [NUL], { | }, Manual
00 to FF
00 to FF