Toshiba B-EX4T1-G/T Operation Manual page 91

[Code Page(CI)] group
[Character set]
Default
Range
[Label(LH,LS,PM,PO,PF,LT)] group
[X position of label home position]
Default
Range
[Y position of label home position]
Default
Range
[Label rotation / Mirror print]
Default
Option
[Y position offset]
Default
Range
[Feed amount fine adj]
Default
Range
[Print(PQ)] group
[Print count]
Default
Range
[Cut interval]
Default
Range
[PC Save Area Allocate] group
Specifies the memory size (number of blocks) for storing the format data used in Z Mode. The PC
save area of the TPCL is used. In Z Mode, the PC save area is divided into two. One is used for
format data and the other is used for the graphic data.
Specify the number of blocks used for storing the commands. The remaining blocks are used as the
graphic data area.
[Format data area]
Other than 0: Sets the number of blocks to allocate for format. (Remain area is for graphic.)
0: Sets to share the PC save area with the format data and the graphic data half and half.
Default
Range
0
0 to 30
0
0 to 9999
0
0 to 9999
Bottom first
Bottom first, Top first, Bottom first mirror print, Top first mirror print
0
0 to 9999
0
-120 to 120
1
1 to 9999
0
0 to 999
1
0 to 99