Progress Status - Toshiba B-EX4T1-G/T Operation Manual

Progress Status

Textual information about the processing in progress is added to the progress status as needed.
Progress status format:
["Device Name"], "Processing", "Process", "Detailed status" ("Error code")
Processing
Processing in progress is displayed.
Processing
Get Parameter
Set Parameter
Firmware Download
BASIC Download
Emulation Download
Get Printer Info
Save Printer Info
Printer Reset
Head Check
Data Logging
Maintenance Counter Clear
Parameter Clear
Memory Allocate
Memory Format
Send File
Test Print
Process
Process in progress is displayed.
Process
Start
Succeed
Fail
Cancel
Preparing for downloading...
Updating the printer...
Sending "section name"
firmware to the printer...
Memory Allocate
Updating the main
Description
Obtains the parameter setting values from the connected printer on the
[Parameter Setting] screen.
Downloads the parameter setting values to the connected printer on the
[Parameter Setting] screen.
Downloads the firmware to the connected printer on the [Firmware] tab
page in the [Download] screen.
Downloads the BASIC program to the connected printer on the [BASIC]
tab page in the [Download] screen.
Downloads the Z Mode/D Mode BASIC program to the connected
printer on the [Emulation] tab page in the [Download] screen.
Obtains the printer information in a file on the [Self Diagnosis] tab page
in the [Maintenance] screen.
Saves the printer information in a file on the [Self Diagnosis] tab page in
the [Maintenance] screen.
Resets the printer on the [Setting] tab page in the [Maintenance] screen.
Performs a print head check on the [Setting] tab page in the
[Maintenance] screen.
Takes the log on the [Setting] tab page in the [Maintenance] screen.
Performs a maintenance counter clear on the [Setting] tab page in the
[Maintenance] screen.
Performs a parameter clear on the [Setting] tab page in the
[Maintenance] screen.
Performs a memory allocation on the [Setting] tab page in the
[Maintenance] screen.
Formats the memory on the [Setting] tab page in the [Maintenance]
screen.
Sends a specified file to the printer on the [Tool] tab page in the [Tool]
screen.
Performs a test print on the [Test Print] tab page in the [Tool] screen.
Description
Processing is started.
Processing normally ends.
Processing abnormally ends.
Processing ends due to cancellation.
Preparing for download.
The firmware is being updated on the printer.
The parameter setting values are being updated on the printer.
ROM file is being sent to the printer in the Firmware Download
processing.
A memory is being allocated in the BASIC Download processing.
The main program is being sent or updated in the BASIC Download