Toshiba B-EX4T1-G/T Operation Manual page 87

［RFID offset print］
Printer
B-EX4T1-G/T(203dpi/305dpi)
B-EX4T2-G/T (203dpi/300dpi)
B-EX4D2-G/T (203dpi/300dpi)
B-EX4T2-H (600dpi)
［LABEL SHIFT］
Printer
B-EX4T1-G/T(203dpi/305dpi)
B-EX4T2-G/T (203dpi/300dpi)
B-EX4D2-G/T (203dpi/300dpi)
B-EX4T2-H (600dpi)
----- Code setting -----
1. Control prefix(~)
Range: 00 to FF (hexadecimal)
2. Format prefix(~)
Range: 00 to FF (hexadecimal)
3. Delimiter char(~)
Range: 00 to FF (hexadecimal)
----- Effective command -----
Sets which setting, the command parameter or system mode parameter (set by means of this tool and a
printer), is effective by means of the selection of the check box.
Selected: The command parameter is valid. (The system mode parameter is invalid.)
Not selected: The system mode parameter is valid. (The command parameter is invalid)
1. Label size(LL)
2. Label type(MN)
3. Media type(MN)
4. Tone Adj(SD)
5. Tone Adj(MD)
<Button>
[Load]
Reads the settings from a specified file.
[Save]
Saves the settings in a specified file.
[Download]
Downloads the settings to the printer.
[Get printer param.]
Retrieves the settings from the printer.
Note: If no Initial Values & Table files have been sent to the printer before, no data cannot be obtained
from the printer.
[Reset to default]
Restores all settings to the default.
Range
NONE
WITHOUT BACKFEED
WITH BACKFEED
Range
-999.9 to +999.9 mm
Default
NONE
Default
0.0