Z Mode DriveMapping Tab
Sets how to assign the printer driver specified in the command to the one in TPCL.
Sets the TPCL drive corresponding to the ZPL drive.
Reads the settings from a specified file. (Settings of all pages will be read.)
Saves the settings in a specified file. (Settings of all pages will be saved.)
Downloads the settings to the printer. (Settings of all pages will be downloaded.)
[Get printer param.]
Retrieves the settings from the printer. (Settings of all pages will be retrieved.)
If no Initial Values & Table files have been sent to the printer before, no data cannot be obtained
from the printer.
[Reset to default]
Restores all settings to the default.