Setting Tab - Toshiba B-EX4T1-G/T Operation Manual

Setting Tab

[Head Check...]
A print head broken element check is performed.
When this button is clicked, the following confirmation message is displayed.
When [Yes] is clicked, the processing starts.
When [No] is clicked, the processing is canceled.
When the processing starts, the progress status screen is displayed. When the processing is completed,
the completion screen is displayed.
This function is executed only when the printer is in TPCL or TPCL1 mode and idle state.
If a broken element is detected, the printer results in an error after the head check finished. Clicking
[Printer Reset] restores the printer to the idle state.