Download; Firmware Download - Toshiba B-EX4T1-G/T Operation Manual

Download

The Download menu enables downloading the printer firmware program.
When the [Download] icon on the menu icon area is clicked, the [Download] screen is displayed.

Firmware Download

Be sure to avoid the environment where a power failure may occur in the middle of the downloading.
If a power failure occurs during a firmware updating, the printer may not start up.
Even when the printer can normally start up, download the firmware again.
If cannot, please contact TOSHIBA TEC sales representative.
[ROM List]
ROM files of the firmware to be downloaded to the printer are displayed.
No file has been displayed as default.
ROM files are listed by the program section, rather than in a chronological order. The program sections
are sorted in the order of BOOT, MAIN, C/G, XML, HTML, KANJI and CHINESE.
Downloading is performed from the top of the list.
When a ROM file is selected, the firmware information is displayed under the list.
[Add...]
Specified ROM files are added to [ROM List].
When this button is clicked, the file selection screen appears. Choose a ROM file and click [Open].
Then this ROM file is added to [ROM List].
If the specified file is not a ROM file, or if the specified ROM file is not for the printer model selected for
this Product, an error message will be displayed.
Up to four ROM files can be added.
One file per program section is accepted. In the case the second file is chosen for a program section,
the following confirmation message is displayed.