RFID Tab
[Module] Group
[Module Type]:
Sets the RFID module type installed in the printer.
Default
Options
[Tag Type]:
Selects the RFID tag type.
The displayed options differ depending on the RFID module type.
Default
Options
[Country]:
The country where the RFID module can be used is displayed.
This setting cannot be changed.
Displayed country may be incorrect.
This symptom will be corrected by a future firmware upgrading.
None
B-EX4T1-G/T (203dpi/305dpi) / B-EX4T1-T JP (305dpi):
None, H1 (HF Band), H2 (HF Band), U2/U4 (UHF Band)
Other than B-EX4T1-G/T (203dpi/305dpi) / B-EX4T1-T JP (305dpi):
None, H1 (HF Band), H2 (HF Band), U4 (UHF Band)
NONE
None: NONE, I-Code, Tag-It, C220, IOS15693, C210, C240, C320, EPC C1 Gen2
H1: NONE, I-Code, Tag-It, C220, IOS15693, C210, C240, C320
H2: NONE, IOS15693
U2/U4: NONE, EPC C1 Gen2
U4: NONE, EPC C1 Gen2