Download  Print this page

General (2) Tab - Toshiba B-EX4T1-G/T Operation Manual

Bcp setting tool, b-ex4 series barcode and label printers.
Hide thumbs

Advertisement

General (2) Tab

[Position Adjustment] Group
[Feed]:
Sets a fine adjustment value for the stop position in units of 0.1 mm.
When the value is negative (-), the feed length becomes longer.
The fine adjustment value set by the Position Fine Adjust command [AX] is displayed in the left box.
When the parameter is not retrieved, the value in the left box becomes zero (0).
Default
Range
[Cut/Peel Off]:
Sets a fine adjustment value for a cut (strip) position in units of 0.1 mm.
When the value is negative (-), the feed length to the cut (strip) position becomes longer.
The fine adjustment value set by the Position Fine Adjust command [AX] is displayed in the left box.
When the parameter is not retrieved, the value in the left box becomes zero (0).
Default
Range
[Back Feed]:
Sets a fine adjustment value for the back feed length in units of 0.1 mm.
When the value is negative (-), the back feed length becomes shorter.
The fine adjustment value set by the Position Fine Adjust command [AX] is displayed in the left box.
When the parameter is not retrieved, the value in the left box becomes zero (0).
Default
Range
0.0 mm
-50.0 to +50.0 mm
0.0 mm
-50.0 to +50.0 mm
0.0 mm
-9.9 to +9.9 mm

Advertisement

Table of Contents

   Related Manuals for Toshiba B-EX4T1-G/T

This manual is also suitable for:

B-ex4t2-g/tB-ex4t1-t jpB-ex4t3-hB-ex4t2-hB-ex4d2-g/t

Comments to this Manuals

Symbols: 0
Latest comments: