Download  Print this page

Toshiba B-EX4T1-G/T Operation Manual Page 43

Bcp setting tool, b-ex4 series barcode and label printers.
Hide thumbs

Advertisement

[Centro.] Group
[ACK/BUSY]:
Selects the Centronics ACK/BUSY signal timing.
Default
Options
[Input Prime]:
Selects whether or not a reset is performed when the Centronics nInit signal is ON.
Default
Options
[Plug & Play]:
Selects whether or not the plug-and-play function is active on the centronics port.
Plug & Play cannot be disabled for the USB interface.
Default
Options
[USB] Group
[USB Serial Number]:
Selects whether or not USB serial numbers are enabled.
When the numbers are disabled, connection to the USB port is established.
Whenever the USB port is changed, printer driver installation is required.
When the numbers are enabled, connection to the displayed serial number is established.
Printer driver installation is required for each serial number.
Default
Options
A serial number is a number specific to the printer.
This setting cannot be changed.
[Auto Status Response]:
Selects whether to enable or disable the auto status response for the communication via USB.
Default
Options
TYPE 1
TYPE 1 (BUSY goes LOW at the same time as ACK goes HIGH.),
TYPE 2 (BUSY goes LOW at the same time as ACK goes LOW.)
Enable
Disable, Enable
Disable
Disable, Enable
Disable
Disable, Enable
Disable
Disable, Enable

Advertisement

Table of Contents

   Related Manuals for Toshiba B-EX4T1-G/T

This manual is also suitable for:

B-ex4t2-g/tB-ex4t1-t jpB-ex4t3-hB-ex4t2-hB-ex4d2-g/t

Comments to this Manuals

Symbols: 0
Latest comments: