General - Toshiba DB-EA4D Command Manual

1. General

Printer basic functions
Print technology
Print resolution
Print head
I/F
Printer command
Printer configuration
Flash download
Character set
SBCS Font
Printable dots
Print speed
O.P. panel
Paper Loading
Document length
Paper cutter
Media
Dual color
Black Dot Mark
Label mode
Duplex printing
Direct Thermal printer
203dpi horizontal and vertical
864 dots
USB 2.0 High speed, Printer Class
Parallel (Compatible, Nibble)
Ethernet 10BASE-t, 100BASE-TX (IEEE802.3 Conforming)
Auto negotiation 10/100Mbps Full/Half Duplex
TCP/IP v4
Raster graphics command only as a print command.
Other commands ;
Status command, Duplex mode command, Flash download command,
Online diagnostics command, Printer configuration command
Command and Set up mode can change the printer configuration.
Boot and Main firmware can be downloaded by using a Flash
Download Utility.
ASCII 96 characters only
20(H) x 34(V) , 16.9 cpi
Max : 832dots (104mm)
58mm: Graphics : 432dots (54mm)
SBCS : 432dots (36 Columns)
80mm: Graphics : 576dots (72mm)
SBCS : 576dots (48 Columns)
4": Graphics : 752dots (94mm)
SBCS : 744dots (62 Columns)
5.1": Graphics : 832dots (104mm)
SBCS : 832dots (68 Columns)
Maximum 6 ips
2 Line LCD, 3 Switches, 2 LEDs (Power on, Error)
*) Refer to Control Panel manual for the control of LCD.
Automatic Paper Loading
Minimum Length = 70mm
Maximum Length = 554.8mm (for each side)
Full cut (Rotary type) : Option
Max 216mm (W) x 7 inch (diameter)
Not support
Support
Support
Support
1 DB-EA4D Command manual (rev.00)