Section 5.6 Print Quality - Welch Allyn Spot Vital Signs Service Manual

Welch Allyn, Inc. Spot Vital Signs Service Manual
Revision A
1. Connect the unit to the test station by hooking up the pneumatic tubing, removing the battery and
connecting the power supply. Ensure that there are no obstacles in the way of the IR window.
2. Ensure that you have the HP IR printer that work with the Spot Vital Signs.
3. Choose Test|Print Quality. Choose "test pattern 1." The printer will print out a pattern of large
and small ASCII characters. Verify the quality of the printer output. Once test 1 is complete,
choose test pattern 2. The printer will print out a solid gray field. Verify the quality of the printer
output.
4. Select "OK" to close the box.
Note: This test can only be completed if using the TTL service port. This test can not
be completed if the tester is using IR for communication. Further, if print quality is
poor, change out the AA batteries of the printer and re-test.

Section 5.6 Print Quality

End of Section 5.6
Page 52 of 64