Directions for Use
Battery Replacement
Removing the Battery Section
1.
Hold the instrument handle firmly by the Battery Section.
2.
Turn the Rheostat Section counterclockwise until it
detaches from the Battery Section.
Replacing a New Battery Section
1.
Insert the Rheostat Section into the new Battery Section.
2.
To connect the two sections, turn the Rheostat Section
clockwise until tight.
3.
Verify the Rheostat Section is secure on the Battery
Section of the instrument handle.
Specifications
Note: Specifications and design may change without notice.
Handle
Model Number:
71911
Dimensions:
5.4" L x 1.125" Dia. (Max)
(137mm x 28.6 mm)
Weight:
4.5 oz. (128 g)
Typical Charge Time: 14 hours (fully discharged)
Typical Discharge Time: 110 minutes (for new battery)
51