Basic System Description; Introduction - Welch Allyn Spot Vital Signs Service Manual

Welch Allyn, Inc. Spot Vital Signs Service Manual
Revision A

1.3 Basic System Description

Introduction

The Welch Allyn Spot Vital Signs is designed to non-invasively and automatically measure systolic
and diastolic pressure, pulse rate, temperature and oxygen saturation (SpO2 ) for adult and pediatric
patients. THE WELCH ALLYN SPOT VITAL SIGNS IS NOT INTENDED TO BE USED ON
NEONATAL PATIENTS. All blood pressure, pulse, temperature and SpO2 values can be viewed on
a large, easy-to-read display, and may be printed via the IrDA port to an external printer as desired.
The rechargeable lead acid battery and variety of mounting accessories make the Welch Allyn Spot
Vital Signs convenient for many locations. The operator may choose any combination of
simultaneous measurement modalities. The Welch Allyn Spot Vital Signs is intended for use in a wide
variety of health care settings. This includes hospital departments, as well as alternate care settings,
such as physicians offices, clinics, and long term care facilities. The Welch Allyn Spot Vital Signs is
not intended for continuous monitoring of patients, or for use during transport of a patient. The
Welch Allyn Spot Vital Signs is not intended for use in environments that are not supervised by a
health care practitioner.
Refer to the Spot Vital Signs Operator's Manual for complete information on Indications For Use,
Special Features, Supplies and Accessories
Page 8 of 64