Making Calls
Making Intercom Calls
There are two methods for making an intercom call. One causes the called
telephone to ring (tone-first). The other causes your voice to sound out at the
called telephone (voice-first). Your installer can set the system to deliver either
tone-first or voice-first calling.
NOTE:
The following instructions assume a tone-first setting. You can
change a call to voice announce signaling for that call simply by pressing
the INTERCOM button again after dialing the extension number or by
pressing the DSS/BLF button again.
To manually cause the other telephone to
•
ring (tone calling),
1. PRESS INTERCOM.
2. DIAL extension number (called telephone will
ring).
To tone call automatically,
•
1. PRESS DSS/BLF button (called telephone will
ring).
NOTE:
The following instructions assume a voice-first default setting. Any
user can change a call to a tone signaling for that call simply by pressing the
INTERCOM button again after dialing the extension number or by pressing
the DSS/BLF button again.
To voice announce manually,
•
1. PRESS INTERCOM.
2. DIAL extension number.
3. SPEAK your announcement.
To voice announce automatically,
•
1. PRESS DSS/BLF button.
2. SPEAK your announcement.
28
GCA70-250
Ext 321 J Doe
Press Intercom to Display
Extension Number
Calling J Smith
CALLBK
MSG
Ringing Intercom
Attendant Manual