Other Features
Default Volume Control
You can set a permanent loudness level for any volume control setting. The level
will remain at this volume (referred to as the default setting) until you change the
setting.
To set a permanent speaker,
•
headset, handset, or group listening
loudness for all future calls,
1. PRESS INTERCOM.
2. ACTIVATE speaker, headset, handset, or
group listen mode to be affected.
3. While in that mode, PRESS VOLUME UP
or VOLUME DOWN button to adjust
loudness.
4. DIAL
programmed SAVE button to hold the
loudness at the last setting for all future
calls (until you change the default again).
5. REPEAT this procedure in each mode until you've set all default
volume levels.
86
**7
OR PRESS
Impact Volume Buttons
GCA70-250
Impact SCS Volume Buttons
Attendant Manual